Changzhou shidai jinhua clutch co., LTD. : skid treatment of clutch (III)
2019-03-13
(4) if found that the friction piece serious wear, rivet exposure, aging hard, burn damage and oil soaked to, should be replaced by the new film, the replacement of the new friction piece shall not have cracks or damage, the depth of the rivet should meet the requirements;
(5) check the clutch main pump oil hole, such as oil hole should be dredged;
6. Such as the above inspection, adjustment and repair, still can not eliminate the fault, then decompose the clutch, check the spring pressure plate. Pressure plate spring is good, should be the same length, such as uneven, should be replaced new, such as slightly reduced elasticity, length difference is not big, can be adjusted under the spring add or subtract gasket.
This article is arranged by changzhou shidai jinhua clutch co. LTD
